Archive

Posts Tagged ‘gyro’

Inertia RC Nano Gyro – Now Available

February 16th, 2010 No comments

Inertia Nano GyroDesigned with nothing but pulse pounding 3D in mind the NANO delievers rock solid tail authority for both pro and new pilots alike. The NANO guaruntees easy setup and consistant performance from beginning to end of every flight.

Designed and tested by Mike Fortin, the NANO is backed by Inertia RC’s industry leading 50% Warranty replacement and in the event you need it, repairs are free.

Key features:

  • Superior tail hold and pirouette consistency
  • Tiny and lightweight
  • Designed for all helicopters; from the 200 electric to 700 size nitro
  • Supports all types of digital servos (760us, 960us and 1520us)
  • Offers 250Hz, 333Hz and ultra-high 560Hz servo frame rates
  • Industry leading MEMS sensor technology
  • Standard configuration via LCD
  • Firmware upgradable
  • Dual operating modes; AVCS (heading lock) and Rate

Specifications:

  • Dimensions: 20.6 x 20.6 x 9.6mm (0.81 x 0.81 x 0.36 inch)
  • Weight: Plastic case 7.9 grams
  • Sensor Type: MEMS
  • Control system: Proprietary PID with adaptive tuning
  • Supported servos: 760us, 960us and 1520us centre pulse
  • Standard setup: Servo type, reversing and dual endpoint adjustment
  • Operating voltage: 3.8V to 8.4V
  • Current draw: <75mA

Contents:

  • Inertia RC NANO Gyro
  • Gyro Instructions
  • Adhesive foam pads (3x)
  • Vibration damping plate

www.inertiarc.com

Spyshot: Nano Interial Gyro

November 16th, 2009 No comments

Interia Gyro

Prototype testing will begin the next few days on what we believe is the smallest high performance gyro on the planet. The new Inertia Nano is only 7.9 grams and will offer optional length wires for your particular helicopter from 250 electric to 90 size nitro. The new Nano will also offer our 50% crash replacement!

www.inertiarc.com

Categories: General Discussion Tags: ,

New JR G370 3D Gyro

June 30th, 2009 No comments

JR G370 3D

Overview

Whether you’re new to 3D flying or a seasoned expert, the more you know about the new G370 3D gyro, the more you’ll know you need it. For openers, it’s the most durable gyro in its class. With a machined aluminum frame plus aluminum top and base plates, it’s virtually crash proof. And if you fly lots of 3D, you know how valuable that can be. Besides that, the G370 3D’s charms aren’t defined only by its toughness. At roughly half the thickness of JR’s superb G770 3D, it’s equally precise. And in terms of resistance to external forces, the smaller 370’s pirouette rate-consistency is absolutely unmatched. Plus it features heading lock and normal modes, along with settings for both electric and glow power. And finally, just to make an easy decision even easier, it’s covered by JR’s 3-year warranty and outstanding service record.
Key Features

  • Provides outstanding tail hold for aggressive 3D performance
  • Wide application range from 450 electric to 90 size nitro helis
  • Small and lightweight
  • Aluminum case for crash damage protection and RF shielding
  • Constant pirouette rate
  • Heading lock and normal modes available
  • For use with digital servos only

G370 3D Gyro Specs

  • Type: MEMS Sensor 3D Gyro
  • Sensor Type: MEMS
  • Weight: 16 grams
  • Dimensions (WxLxH): 1.00” x 1.06” x 0.41”
  • Gain Type: Heading lock and normal rate modes interlocked with gyro gain
  • Operating Voltage: 4.8–6.0V (Note: most tail servos are limited to 4.8V)
  • Reversing Switch: Yes
  • Servo Travel Limiter: Yes
  • Current Draw: 70mAh

www.jrradios.com

Categories: General Discussion, Technology Tags: , ,

Futaba GY611 Gyro – Perfect Working Order – Sold

June 25th, 2009 No comments