Archive

Posts Tagged ‘beastx microbeast flybarless’

Flybarless: BEASTX – MICROBEAST

February 3rd, 2010 No comments

Another German flybarless entry…when will it stop 😀 This unit will be available at the end of the month from www.freakware.de and will also be on show at the Nuremberg Toy Fair.

BeastX - Microbeast Flybarless Unit

www.beastx.com

(via google translate)

Introductory price including USB interface!
Serial pulse input (PPM / S-BUS / spectrum) can be used only after the software update.
To update the software, the USB interface and the latest software is required.
Information, installation instructions and current software updates, see www.BEASTX.com

Flybarless the revolution!

MICRO BEAST has a housing in aluminum composite construction. With
small size, it can installed in virtually every model helicopter
will. The installation of the MICRO BEAST can both horizontally and vertically
. done

The sensor is based on the latest MEMS technology. By the software with
its sophisticated sensor data is the installation in electrical &
Nitro-model helicopters possible.

MICRO BEAST can be equipped with an optional adapter cable even as Heck
Gyro set up. This is particularly empfi ehlt for Migrating from her conventional
Paddle system slowly to the RIGID-operation with the 3 axis
Solution (3G want to grope gyro mode).

The well thought out and easy setup is quick of hand and it is
neither a computer nor an expensive programming box required. Thus,
also on the airfield for many settings simply and easily
be changed.

The built-in MICRO BEAST swashplate mixer allows light above
addition, the use of simple remote control systems which do not
Swashplate have their own mix (NO MIX).

MICRO BEAST can handle many types of sum signals (PPM / S-BUS
/ Spectrum). With the optional spectrum satellite adapter is installed in
Even without a large indoor model helicopters Kabelaufkommen possible.

Updates and further adjustments (setup) can easily
with the optional USB interface USB2SYS “about the BEAST LINK interface
be carried out. Software for Windows & Mac there are free to the
download at www.BEASTX.com

Specifications:

  • Operating voltage: 3.5 V. .. 8.5 V DC (2S Lipo possible)
  • CPU: 32bit ARM
  • Analog processing: 17bit
  • Sensor: 3-angle MEMS Accelerometers
  • Selectable Servo Neutralimpulsweite:
  • Rear: 760μs / 960μs / 1520μs
  • Selectable Servo Pulse rate:
  • Rear: 50 Hz / 165 Hz / 270 Hz / 330 Hz
  • Swashplate: 50 Hz / 65 Hz / 120 Hz / 200 Hz
  • Swashplate type adjustable:
  • Mechanical / 90 ° / 120 ° / 140 °
  • Dimensions: 34 x 25 x 13.5 mm
  • Weight without cable: approx 20 grams

Serial pulse input: PPM / S-BUS / spectrum (in delivery status not possible)

Delivery:

  • MICRO BEAST
  • Receiver connection
  • Fixings
  • Adjusting
  • Manual

Optional Accessories:

  • USB interface (Settings / Update)
  • Spectrum Satellite Adapter

Delivery is expected in late February