Archive

Archive for the ‘General Discussion’ Category

3D Masters 2010 – Velno, Netherlands

June 21st, 2010 No comments

3DMasters2010

23rd, 24th and 25th July 2010 – Velno, Netherlands
www.3dmasters.org.uk


View 3D Masters 2010 in a larger map

  • 60 of the World’s Top 3D Pilots, including 7 past Winners
  • Freestyle, Set Manoeuvres, Flight to Music, Grand Finals
  • Synchro Competition and Night Competition
  • Demonstration Flights by top Teams: Align, ElyQ, Mikado, Outrage, Robbe, Thunder Tiger
  • World’s Top Demonstration Pilots
  • Grand Awards Ceremony
  • Evening Barbeque and On-site Refreshments
  • Trade Stands
  • 3D Masters Shop and Raffle
  • Night Flying

3D Masters 2010 from 3DHELIFREAKZ on Vimeo.

New Align Trex Parts

June 21st, 2010 No comments

700_new_partsAlign has released a myriad of new upgrades… from new canopy designs and metal anti rotation brackets to new gear sets for both the T-Rex 600/550 and the 700. As usual with Align, we will most likely be seeing these in stores across the country very soon.

 
 
 
 
 

700_gear1

700_gear3

700_gear2

www.rcheliresource.com

Categories: General Discussion Tags:

Futaba 701 Gyro – Spy Shots

April 26th, 2010 No comments

gy701_1

Presented in a preview exhibition at the 3D Jamboree in Japan, Futaba reveals a little more what will certainly be the successor to the GY520 gyro. Size slightly larger than a GY520 or GY611, it incorporates the technology S-BUS and allows use Futaba servos in 760 μs to the contrary GY611. The LCD module setting him also been revised and now offers an integrated fashion governorates.

www.hobby-media.biz

 

gy701_2

gy701_3

Align Trex 550E – Alan Szabo Jr

April 8th, 2010 No comments

Trex 550 Flight test 2 by Alan Szabo Jr with Align 3G Flybarless

GForce Upgrade – Aurora Metal Tail Grips

April 7th, 2010 3 comments

GForce LogoThe other weekend I had one of the plastic tail grips fail on my Avant Aurora, which is essentially the first flight failure I’ve had with the Aurora. The arm on the tail blade grip which holds the ball fatigued, cracked and the ball pulled out. Fortunately I was able to get the heli down with minimal damage.

(broken plastic tail grip)
aurora-broken-grip

Needless to say I’m now looking for a metal tail grip solution to replace the stock Avant plastic ones (which perform fine… they are just not durable enough IMHO). After digging around it turns out GForce maybe able to offer a solution if there is enough demand for an initial run of replacement grips. Hence a show of hand is required to get and indication of how many people would be seriously interested in a set. (yes I know Avant have some in the pipe line, but there is no indication of when that will be)

If you are interested in a set of quality metal tail grips specifically designed for the Avant Aurora please contact Garf at GForce to express your interest, his email can be found in the following thread on RunRyder: http://rc.runryder.com/helicopter/t579394p1/